Identification de l’offre d’emploi R-413082 Date d’affichage 11/09/2021 Retour aux résultats de recherche Postuler

Engineering Technician, Electrical Controls

Job Description Summary

Under the guidance and/or authorization of appropriate supervisor, provide technical support for engineering projects within the Integrated Diagnostic Solutions plant. This support would typically include: the diagnosis of complex problems in manufacturing equipment, development and implementation of solutions to said problems, creation of engineering drawings for new or replacement components to manufacturing equipment, troubleshooting and updates to PLC software, assistance writing operating procedures and validation procedures for manufacturing equipment, assistance performing validations for manufacturing equipment, generation and recording engineering data and results including engineering drawings and reports. As an engineering resource, supports production and the maintenance group correcting equipment breakdowns and completing PM activity as required.

Job Description

Be part of something bigger!

BDis one of the largest global medical technology companies in the world and is advancing the world of health by improving medical discovery,diagnosticsand the delivery of care. We have over 65,000 employees and a presence invirtually everycountry around the world to address some of the most challenging global health issues.

Job Description:

Under the guidance and/or authorization ofappropriate supervisor,providetechnical support for engineering projects within the Integrated Diagnostic Solutions plant.This support would typically include: the diagnosis of complex problems in manufacturing equipment, development and implementation of solutions to said problems, creation of engineering drawings for new or replacement components to manufacturing equipment, troubleshooting and updates toPLC (Programmable Logic Controller)software, assistance writing operating procedures and validation procedures for manufacturing equipment, assistance performing validations for manufacturing equipment, generation and recording engineering data and results including engineering drawings and reports. As an engineering resource, supports production and the maintenance group correcting equipment breakdowns and completingPM (Preventative Maintenance)activity asrequired.

Primary Responsibilities/Accountabilities:

  • Conforms to Quality Policies and Procedures asset forth intheBDDS (BD Diagnostics Systems)Quality Manual.

  • Supports division andOSHA (Occupational Safety and Health Administration)safety policies and guidelines.

  • Supports the manufacturing operation by ensuring the correct operation of manufacturing equipment. This includes diagnosis of complex problems in machine operation and the development and implementation of solutions to these problems.

  • Participates in the design and installation of new manufacturing equipment.

  • Self-Managing:  Willself-manageassigned tasks to meet manufacturing goals and schedules. 

  • Willmaintainregular contact with lead personnel. 

  • Will prioritize and manage multiple and potentially conflicting demands for time and resources.

  • Documentation:  Creates andmaintainsappropriate recordsof work including documentation of engineering drawings and test procedures and results. 

  • Archives electronic files asrequired.

  • Supervision and guidance:  May berequiredtoprovidetechnical guidance to others, such as Maintenance Technicians and Operators. 

Education and Experience:

  • 2+ years of relevant and technically progressive experience including test, design,repair,or maintenance of electro-mechanical equipment within a manufacturing environment. 

  • Must have High School,GED,orUS (United States)military electronics tech school diploma. 

  • Graduate of an applicable college certificate program orAA technical degree preferred.

Complexity of Duties:

  • Applies technical knowledge to solve unique problems on manufacturing and process control equipment.Familiarity with troubleshooting and programming techniques forPLCs (Programmable Logic Controllers), MMI’s, electromechanical sensors and controllers isrequired.

  • Works as member of technical team solving complex problems, implementing engineering upgrades and installations for manufacturing and process control equipment.

  • Plans and executes assignments within guidelines of instructions received from project personnel.

  • Assembles and installs electrical control hardware and wiring. Able to install electrical conduits and raceways for manufacturing equipment and control hardware.

  • Generates engineering and manufacturing process documents.Checks engineering drawings, evaluating correctness of information, accuracy, and logic.

  • Experience with troubleshooting and performing programming changes to ladder logic and manufacturing software including ControlLogix, Studio5000,RS (Repetitive Shock)Logix, Panel Builder, and other PLC and MMI software asrequired. Familiar with the programming of servo-driven systems.Capable of downloading and uploading programs and parameters with laptop software as well as teach pendants.

  • Assistswith integration of complex engineering solutions using software, mechanical and electrical components.

  • Utilizes a wide variety of electrical and mechanical test and fabrication equipment in the execution of assigned tasks. Must be proficient in the use of diagnostic instruments including oscilloscopes, DMMs and logic analyzers.

  • Gathers,correlates,and evaluates test data; generates recommendations used for engineering and review.

  • Shares information efficiently with other areas, particularly Manufacturing,Quality,and product support personnel.

  • Assistswith documentation and drawing updatesutilizingAutoCADand otherCAD (Computer Aided Detection)software asrequired.

Supervision Received:

  • Reports to Manufacturing Engineering Manager ordesignatedSenior Engineer.

  • Appropriate project personnel (typically Project Engineers, Engineering, Manufacturing or Quality Supervisors) will generate high-level instructions for tasks.

  • Some assigned tasks offer latitude for self-management.

  • Some tasks have set procedures; most tasks have deadlines.

  • Technical content of all design and re-design work will be reviewed byappropriate teammember(s).

Contact with Others:

  • Must have good interpersonal skills. Interfaces regularly with members of the Engineering & Process Technology department, Plant Maintenance and Operations personnel.

  • May interface with customers or vendors of manufacturing equipment.

  • May berequiredtoparticipatein the training of maintenance technicians or operators on equipment.

For most roles at BD, employment is contingent upon the Company’s receipt of sufficient proof that you are fully vaccinated against COVID-19. In limited circumstances, weekly testing for COVID-19 may be available instead of vaccination. Consistent with BD’s Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law.

Why join us?

A career at BD means being part of a team that values your opinions and contributions and that empowers you to bring your authentic self to work. Here our associates can fulfill their life’s purpose through the work that they do every day.

You will learn and work alongside inspirational leaders and colleagues who are equally passionate and committed to fostering an inclusive, growth-centered, and rewarding culture. Our Total Rewards program — which includes competitive pay, benefits, continuous learning, recognition, career growth, and life balance components — is designed to support the varying needs of our diverse and global associates.

To learn more about BD visit https://jobs.bd.com/

Becton,Dickinsonand Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.

Primary Work Location

USA MD - Hunt Valley

Additional Locations

Work Shift

US BD 2nd Shift 2pm-1030pm (United States of America)
Postuler

Lieu de l’emploi

Hunt Valley

Consulter la carte pour connaître ce qui se trouve dans les environs.

Lieu de l’emploi

Hunt Valley

Consulter la carte pour connaître ce qui se trouve dans les environs.

Recommander
à un ami

Approbation
du Présiden et Chef de la direction

«Nous sommes une entreprise qui vise des résultats concrets et où nos associés s’emploient chaque jour à améliorer les soins de santé. De nombreuses initiatives sont en cours pour faire de BD un leader mondial des technologies médicales.»
Anonyme, Franklin Lakes, NJ

NE MANQUEZ PAS CETTE OPPORTUNITÉ

Assurez-vous de voir passer l’emploi parfait pour vous dès qu’il sera affiché. Inscrivez-vous à notre service de notification d’offres d’emploi dès aujourd’hui.

Interessé(e) parRecherchez une catégorie et sélectionnez-la dans la liste des suggestions. Recherchez un lieu et sélectionnez-en un dans la liste des suggestions. Enfin, cliquez sur "Ajouter" pour créer votre alerte d'emploi.Recherchez une catégorie et sélectionnez-la dans la liste des suggestions. Recherchez un li

Joignez-vous à notre banque de talents

Téléchargez votre CV pour aider notre équipe de recrutement à identifier un poste à votre mesure. Si une occasion se présente, l’équipe communiquera avec vous.